25HS 85
English / USA
Definitions
1. Front Handle (assist handle) with
Hand Guard.
Handle bar for the left hand at front
of hedge trimmer.
2. Spark Plug Boot.
Connects the spark plug with the
ignition wire.
3. Starting Lock.
Helps to prevent movement of cutter
blade during starting.
4. Fuel Filler Cap.
For closing the fuel tank.
5. Control Handle.
The support handle for the left hand,
located at or toward the rear of the
hedge trimmer.
6. Cutter Blades.
Steel blades for cutting hedges and
shrubs.
7. Blade Scabbard.
Covers cutting blades when hedge
trimmer is not in use.
8. Shroud.
Polymer housing which encloses
the power unit.
9. Choke Lever.
Eases engine starting by enriching
mixture.
10. Filter Housing.
Housing, which covers the air filter.
11. Carburetor Adjustment Screws.
For tuning carburetor.
12. Starter Grip.
The grip of the pull starter, which is
the device to start the engine.
13. Slide Control.
Lever for starting throttle and stop
switch.
14. Fuel Tank.
For gasoline and oil mixture.
15. Muffler.
Reduces engine exhaust noise and
directs the exhaust gases.
16. Throttle Trigger.
Controls the speed of the engine.
17. Throttle Trigger Interlock.
Must be depressed before
activating the throttle trigger.
18. Fuel Pump.
Provides additional fuel feed for a
cold start.
To Next Page
Loading...
