Stihl KMA 130 R - After Finishing Work; Preparing for Transportation or Storage; Transporting; Transporting the KombiMotor

0458-805-8621-A
36
English 19 After Finishing Work
Observe all applicable laws, regulations, standards and
ordinances.
19.1 Preparing for Transportation or Storage
WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, switch off the motor, ensure
the KombiTool and its cutting/working attachment have
stopped and remove the connecting cord before transporting
the power tool or putting it down.
To prepare the power tool for transportation or storage:
► Switch off, @ 16.2.
► Remove the connecting cord, @ 15.2.
► If the power tool became wet during operation, allow it to
dry completely before charging or storing.
20.1 Transporting the KombiMotor
WARNING
To reduce the risk of personal injury from unintended
activation, never transport the KombiMotor with the
connecting cord inserted.
WARNING
To reduce the risk of injury from loss of control and blade or
line contact, never carry or transport your power tool with the
KombiTool or its cutting/working attachment moving,
@ 7.5.4. Ensure the KombiTool and cutting/working
attachment have stopped before setting the power tool
down, @ 7.5.4.
When transporting the power tool:
► Always transport the power tool in accordance with the
instructions found in this manual and the manual for the
KombiTool being used.
► When transporting the KombiMotor in a vehicle, secure
and position it to prevent turnover, impact and damage.
21.1 Storing the KombiMotor
WARNING
Store the KombiMotor and its KombiTools indoors in a dry,
secure place that is inaccessible to children and other
unauthorized users, @ 8. Improper storage can result in
unauthorized use and damage to the KombiMotor, @ 8.
WARNING
To reduce the risk of unintended activation, never store the
KombiMotor with the connecting cord inserted. Always
remove the connecting cord before storing.
When storing the KombiMotor:
► Remove, clean and inspect the KombiTool and its
cutting/working attachment.
► Clean the KombiMotor, @ 22.
► Store the KombiMotor and its KombiTools indoors in a dry
and secure location, out of the reach of children and other
unauthorized persons.
19 After Finishing Work
20 Transporting
21 Storing