0458-805-8621-A
37
English
22 Cleaning
22.1 Cleaning the KombiMotor
WARNING
To reduce the risk of personal injury from unintended
activation, remove the connecting cord before carrying out
any cleaning work, @ 8. Users of this KombiMotor should
carry out only the cleaning described in this manual.
To clean the KombiMotor:
► Clean polymer components with a slightly dampened
cloth. Do not use detergents or solvents. They may
damage the polymer components.
► Do not use a pressure washer to clean the unit or spray it
with water or other liquids.
► Keep the socket free from foreign matter and clean as
necessary with a soft brush or soft, dry cloth.
NOTICE
Never spray the KombiMotor with water. Spraying it with a
stream of water could result in damage to the electronics
and other systems.
22.2 Clean the Contact Surfaces of the Connecting
Cord
► Remove the Connecting Cord, @ 15.2.
► Clean the contact surfaces (1) with a dry cloth.
► If a dis-coloration (arrow) is still visible on the contact
surfaces: Sand down the dis-coloration with a fine P 600
sand paper until the contact surfaces shine again.
22 Cleaning
1
1
1
0000-GXX-6041-A0
0000-GXX-6245-A0
To Next Page
Loading...
