Stihl MS 650 - Page 99

98 MS 650, MS 660
: Inspect the generator and poles
(arrow) for cracks or other
damage. If damage is found,
replace the generator.
VA
176RA239
: Inspect the magnet ring (arrow) in
the flywheel for cracks or other
damage. If damage is found,
replace the flywheel.
Reassemble in the reverse
sequence.
178RA195
VA
: Place the generator in position
with the connecting wires (1)
facing the crankcase.
: Position the generator wire in the
crankcase recess (arrow).
: Push the guide into the
178RA188
VA
2
2
1
2
crankcase bore.
– Install screws (2) with Loctite 242
– b 17
: Tighten down the screws firmly –
b 3.5
Reassemble all other parts in the
reverse sequence.
– Positioning the wiring – b 15.2