MSA 160 C, MSA 200 C
English
38
Trigger switch
The motor speed can be controlled
using the trigger switch. The more the
trigger switch is depressed, the higher
the motor speed.
N Release trigger switch (2) so that it
springs back into its original position
– in the original position, the trigger
switch is once again blocked by the
trigger switch lockout (1)
The coasting brake stops the saw chain.
N Set the hand guard to ƒ – the saw
chain is blocked
During breaks and after work, remove
the battery from the machine.
Removing the battery
N Press both safety catches (3)
simultaneously – battery (4) is
unlocked
N Remove battery (4) from the
housing
When not using the machine, it must be
put down in such a way that it does not
endanger anyone.
Ensure that the machine cannot be used
without authorization.
Switching Off
To Next Page
Loading...
