Why is the run time on my Stihl MSA 161 T Chainsaw so short?
If your Stihl chainsaw's run time is too short, the battery may not be fully charged; recharge it completely. Alternatively, the battery life may have been exceeded, meaning it's time to replace the battery.
Why does the wood smoke when using my Stihl MSA 161 T Chainsaw?
If wood smokes or smells burnt when using your Stihl Chainsaw, it could be because: * The chain is dull or improperly sharpened. Properly sharpen the chain. * Your working technique is improper or the saw is being misused. Obtain instruction on proper working technique. * There is insufficient bar and chain oil.
Why does my Stihl Chainsaw smoke or smell burnt?
If your Stihl chainsaw smokes or smells burnt during sawing, it could be due to several reasons. The chain may be dull or improperly sharpened, so ensure you properly sharpen the chain. Your working technique might be improper, consider obtaining instruction on proper working technique. Also, there might be insufficient bar and chain oil; in this case, have the chain lubrication mechanism checked by an authorized STIHL servicing dealer.
Why does my Stihl MSA 161 T cut out during operation?
Your Stihl Chainsaw might cut out during operation if the chainsaw is too hot or there's an electrical malfunction. If the chainsaw is too hot, remove the battery and allow it to cool down. If there is an electrical malfunction, remove the battery and insert it again, then switch on the saw.
What to do if my Stihl Chainsaw does not start when switched on?
If your Stihl Chainsaw doesn't start, the cause could be a low battery charge, or the battery is too hot or cold. Recharge the battery fully as described in the instruction manual for the STIHL chargers or allow the battery to cool down/warm up. Other possible causes include a malfunction in the saw or battery, no electrical contact between the chainsaw and battery, or the saw or battery being damp. For malfunctions, engage the chain brake, remove the battery, clean the contacts, refit the battery, disengage the chain brake, and switch on the saw. If the problem persists (3 or 4 LEDs flash red), contact your STIHL servicing dealer for assistance. For electrical contact issues, engage the chain brake, remove and refit the battery. If the saw or battery is damp, allow them to dry.
Why does my Stihl Saw cut out during operation?
Your Stihl Saw might be cutting out during operation because the chainsaw is too hot. If so, remove the battery and allow the chainsaw to cool down. Alternatively, there may be an electrical malfunction. To address this, remove the battery and insert it again, then switch the saw back on.
What to do if my Stihl chainsaw cuts out while I'm using it?
If your Stihl chainsaw cuts out during operation, it could be due to the chainsaw being too hot; allow it to cool down. Alternatively, there may be an electrical fault; in that case, engage the chain brake, remove and refit the battery, and switch on the chainsaw.
General| Idle speed | - RPM |
|---|---|
| Chain pitch | 1/4 \ |
| Blade length | 250 mm |
| Product color | Black, Grey, Orange |
| Quick stop function | Yes |
| Power source | Battery |
| Battery voltage | 36 V |
| Sound power level | 94 dB |
| Vibration emission | 2.2 m/s² |
| Sound pressure level | 83 dB |
Weight and Dimensions| Weight | 2500 g |
|---|
Identifies and describes the main parts of the STIHL MSA 161 T chain saw and its battery.
Details safety symbols found on the chain saw and their meanings.
Details safety symbols found on the battery and their meanings.
Specifies the intended use of the STIHL MSA 161 T chain saw and its limitations.
Outlines physical and mental health requirements for operating the chain saw.
Details essential protective clothing and gear for safe chain saw operation.
Explains dangerous forces that can occur during chain saw operation.
Details the causes, risks, and prevention methods for kickback.
Provides practical steps and techniques to prevent kickback situations.
Covers essential safety precautions and instructions for battery handling.
Emphasizes safety during maintenance and repair operations.
Details the procedure and indicators for charging the battery.
Covers the assembly of the chain, guide bar, and chain sprocket.
Step-by-step guide for attaching and detaching the guide bar and chain.
Explains how to properly tension the saw chain for safe operation.
Details the importance of lubrication and recommended oils.
Instructions on how to activate the chain brake.
Instructions on how to deactivate the chain brake.
Guidelines for periodic inspection and servicing of the chain brake.
Details the procedure for safely starting the chain saw.
Details the procedure for safely stopping the chain saw.
Comprehensive guide to checking, maintaining, and sharpening the saw chain.
To Next Page
