EasyManuals Logo

Stihl RE 128 PLUS User Manual

Stihl RE 128 PLUS
Go to English
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
RE 108, RE 118, RE 128 PLUS
English
50
Pressure fluctuates or drops Shortage of water Open water tap completely
Comply with permissible suction lift (suc-
tion mode only)
High-pressure nozzle in spray head is dirty Clean high-pressure nozzle; see
"Maintenance"
Water intake strainer in pump inflow clogged Clean water intake strainer; see
"Maintenance"
High-pressure pump is leaky, valves are
defective
Have the machine checked by a servicing
dealer
1)
Nozzle clogged Clean nozzle
No supply of detergents Detergent tank is empty Fill detergent tank
Detergent intake is clogged Eliminate clog
1)
STIHL recommends STIHL servicing dealers
Before working on the machine, unplug the power cord, turn off the water supply and actuate the spray gun until the pressure has
been relieved.
Fault Cause Remedy

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl RE 128 PLUS and is the answer not in the manual?

Stihl RE 128 PLUS Specifications

General IconGeneral
Operating Pressure135 bar
Water Flow Rate500 l/h
Max Water Temperature60 °C
Power SourceElectric
Power Consumption2.3 kW
Mains Voltage230 V
Frequency50 Hz
Power Cord Length5 m
Sound Power Level85 dB(A)

Related product manuals