Stihl RM 248 - After Finishing Work; Post-Operation Procedures; Transporting the Lawn Mower; Transporting Procedures

0478-111-9647-A
43
English 11 Operating the Lawn Mower
► If the sharpening angle is not correct: sharpen the blade,
@ 19.2.
► If anything is unclear: consult a STIHL specialist dealer.
11.1 Holding and Guiding the Lawn Mower
► Hold the handlebar with both hands so the thumbs
enclose the handlebar.
11.2 Adjusting the Cutting Height
Seven cutting heights can be set:
– 25 mm = position 1
– 32 mm = position 2
– 40 mm = position 3
– 48 mm = position 4
– 57 mm = position 5
– 66 mm = position 6
– 75 mm = position 7
The positions are indicated on the lawn mower.
Adjusting the cutting height
► Pull lever (1) from the notch and move to the desired
position.
11 Operating the Lawn Mower