Stihl TS 350 User Manual


:DUQLQJ
Never use carbide-tipped, wood-cutting
or circular saw blades. They can cause
severe personal injury from reactive
forces, blade contact or thrown objects.
Your STIHL dealer stocks a range of
special abrasive wheels for the many
applications of the cut-off machine.

:DUQLQJ
Use of the wrong abrasive wheel or
material for which it was not designed
may cause that wheel to shatter causing
serious or fatal injury.
Only use the abrasive wheel approved
for the type of material to be cut. There
are different abrasive wheels each
specially marked, for example:
1. Stone
Also can be used for concrete,
masonary, reinforced concrete
and brick cutting.
2. Steel
Can be used for all ferrous metal
cutting.
3. Asphalt
Also can be used for aggregate
concrete cutting.
4. Ductile iron
Also can be used for certain grades
of cast iron (SG 17-24), bronze and
copper cutting.
For cutting composite materials please
ask your STIHL dealer.
'LDPRQGDEUDVLYHZKHHOV
Diamond abrasive wheels have a much
better cutting performance than the
abrasive wheels. The wheels are steel
centered and diamond particles are
imbedded in their cutting edges.
They can be used for concrete, asphalt,
natural stone, clay pipe, brick and the
like.
They are not suitable for cutting metal or
other materials.
Wet or dry cutting is possible. With wet
cutting you get a longer life of your
wheel. Water attachments are available
for your STIHL cut-off machine.
See the appropriate section of your
owner’s manual.

:DUQLQJ
Do not remount a used diamond
abrasive wheel without first inspecting
for under-cutting, flatness, core fatigue,
segment damage or loss, signs of
overheating (discoloration) and possible
arbor hole damage.
Check the wheel for cracks and make
sure that no pieces have broken off the
wheel before use.
Always fit the wheel so that the arrow on
the wheel points in direction of the
rotation of the spindle.
7+(86(2)7+(&872))0$&+,1(
7UDQVSRUWLQJWKH&XWTXLN
70

:DUQLQJ
Always stop the engine before putting a
cut-off machine down or carrying it. The
abrasive wheel continues to rotate for a
short while after the throttle trigger is
released (flywheel effect). Carrying a
cut-off machine with the engine running
is extremly dangerous. Accidental
acceleration of the engine can cause the
wheel to rotate. Avoid touching the hot
muffler.
By hand: When carrying your cut-off
machine by hand, the engine must be
stopped and the cut-off machine must
be in the proper position. Grip the front
handle and place the muffler at the side
away from the body.

:DUQLQJ
Always protect the cutting wheel from
hitting the ground or any other objects.
Damaged wheels may shatter and
cause serious or fatal injury.
%\YHKLFOHProperly secure your
cut-off machine to prevent turnover, fuel
spillage and damage to the cut-off
machine.
1HYHUWUDQVSRUWZLWKFXWWLQJZKHHO
PRXQWHG
76 

Stihl TS 350 Specifications

General

Brand	Stihl
Model	TS 350
Category	Saw
Language	English