Technical Information 37.2007 Page 11
TI_37_2007_30_01_02.fm
2.2.3 Carburetor
2.3 Ignition system
2.4 Tool drive
2.5 Weight / dimensions
All-position diaphragm carburetor with booster pump
Standard setting with limiter cap on the high speed screw H:
Low speed screw L: 1 turn open
High speed screw H: Carefully turn counterclockwise as far as the stop, max.
3/4 turn
Basic setting without limiter cap:
Low speed screw L: 1 turn open
High speed screw H: 1.5 turns open
Ignition module with integrated electronic speed limitation
Spark plug (suppressed): BOSCH WSR6F
Electrode gap: 0.020 in (0.5 mm)
TS 410 TS 420
Ribbed poly belt:
– Dimensions: 0.46 in x 29.1 in
(11.7 mm x 740 mm)
0.46 in x 31.5 in
(11.7 mm x 801 mm)
– Designation: 5PJ 740 LB 5PJ 801 LB
Transmission ratio: 2.00 2.11
TS 410 TS 420
without cutting wheel, without fuel 20.7 lb (9.4 kg) 21.2 lb (9.6 kg)
Length including cutting wheel 26.57 in (675 mm) 28.54 in (725 mm)
Height up to guard 14.76 in (375 mm) 16.14 in (410 mm)
Width including handle bar 11.81 in (300 mm) 11.81 in (300 mm)
To Next Page
Loading...
