Need help?Do you have a question about the STIHLER ELECTRONIC ASTOTHERM plus and is the answer not in the manual?
General| Brand | STIHLER ELECTRONIC |
|---|---|
| Model | ASTOTHERM plus |
| Category | Food Warmer |
| Language | English |
Defines DANGER as a hazardous situation leading to death or serious injury.
Defines WARNING as a hazardous situation that could result in death or serious injury.
Details critical safety precautions to prevent injuries during operation.
Warning about haemolysis and the importance of preventing infusion line kinking.
Precautions against air embolism, including priming lines.
Emphasizes aseptic procedures and cleaning for infection prevention.
Safety measures to prevent electric shock, including grounding.
Cautions about patient temperature monitoring and device limitations.
Overview of the ASTOTHERM PLUS warmer and its applications.
Explains how heat is transferred and temperature is controlled.
Procedures for connecting the infusion line and preparing for fluid warming.
Detailed instructions with images on how to insert the infusion extension.
Procedures for cleaning and disinfecting the device after use.
General description of visual and audible alarm signals.
Explains the low temperature alarm condition, reasons, and actions.
Details the overheating alarm, its causes, and necessary actions.
Describes the cable break alarm, its causes, and recommended actions.
Explains the processor alarm, its causes, and how to reset it.
Troubleshooting for failure to enter Standby mode or power issues.
Summary table of different alarm types and their causes.
Procedures and requirements for periodic safety tests.
Steps for visually inspecting the device for damage and labeling.
Procedure for measuring protective earth resistance.
Procedure for measuring insulation resistance.
To Next Page
