ASTOTHERM PLUS Instructions for Use
28
Fig. 5: ASTOTHERM PLUS prepared
The infusion extension is now free hanging between the patient and
ASTOTHERM PLUS and the treatment can be started.
9.3 After use
1. Discontinue infusion.
2. Press the “Standby” button for one second to switch off ASTOTHERM
PLUS.
All indicators turn off, the LED “Standby” turns on blue.
To disconnect ASTOTHERM PLUS from the mains, it is necessary to
completely pull out the plug.
3. Disconnect the infusion extension from the cannula.
4. Wrap the infusion extension out from the circumferential groove of the heat
exchanger.
5. Clean and disinfect ASTOTHERM PLUS after each treatment and if required.
from the liquid container
To Next Page
