2 Safety
Basic principles for safe operatio
n
Vibrations
Vibrations to which the hands and arms
are exposed
The following value is valid for all truck models:
•ā
w
<2.5m/s
2
NOTE
It is mandatory to specify the hand-arm
vibrations, even where the values do not
indicate any danger, as in this case.
CAUTION
The value expressed above can be used to com-
pare forklift trucks of the same category. It cannot
be used to determine the operator's daily expo-
sure to vibrations during real operation of the truck;
these vibrations depend on the conditions of use
(floor conditions, method of use etc.) and therefore
daily exposure must be calculated using data from
the place of use.
26 1
133 801 16 01 EN - 11/2018
To Next Page
