Maintenance 5
Maintenance safety instructions
• Check the vertical creep of the truck.
• Check the smooth movement of the wheels.
• Check the function of the emerg
ency brake
by activating the emergency bu
tton.
• Check, the tiller arm- switch braking func-
tion
• Check the lifting and lowering functions by
operating the buttons.
• Check if all bolts and nuts are tightened
firmly.
• Visual check if there are any br
oken hoses
or broken electric wires.
Servicing and maintenance personnel training and qualification
Truck maintenance must only be carried out
by qualified and authorised personnel.
The annual inspection for prevention of
accidents at work must be carried out by a
personqualifiedtodoso.Thepersoncarrying
out this inspection must provide their expertise
and opinion without being influenced by
economic factors or company internal issues.
Safety is the only critical deciding factor.
The person responsible for carrying out the
inspection must have sufficient knowledge
and experience to be able to assess the
condition of the truck and the efficiency of
the protective installations in accordance
with the technical regulations and principles
established for checking industrial trucks.
Battery maintenance staff
Batteries must only be recharged, maintained
and changed by specially trained personnel.
Personnel must follo
w the manufacturer’s
instructions of the b
attery, the battery charger
and the truck.
It is essential to follow the battery maintenance
instructions and the battery charger operating
instructions.
Maintenance opera
tions that do not require special training
Simple maintenanc
e operations such as
checking the hydraul
ic fluid level or checking
the battery electrol
yte level can be carried out
by persons with no speci
al training.
A specific qualification is not necessary.
Complicated maint
enance operations such
as replacing the ba
ttery, replacing the wheels
and so on should be car
ried out by the autho-
rised service centre.
Refer to the maintenance section of this
manual for further information.
Maintenance safety instructions
List of inspections
Maintenance checklist
Interval
Monthly
6 Month 12 Month
113
3 801 16 01 EN - 11/2018 55
To Next Page
Loading...
