Maintenance 5
Maintenance safety instructions
26
Check the main power cable for damages.
•
27
Check the start-up protection during charging.
•
Function
28 Check the horn function.
•
29
Check the air gap of the electromagnetic brake.
•
30
Test the emergency braki
ng.
•
31
Test the reverse and reg
enerative braking.
•
32
Test the safety (belly) button function.
•
33
Check the steering function.
•
34
Check the lifting and lowering function.
•
35 Check the tiller arm switch function.
•
General
36
Check if all decals are legible and complete.
•
37
Carry out a test run.
•
.
Technical inspection and maintenance characteristics
Assembly
Item / Lubrica
nt
Capacities / Set
ting Values
Hydraulic Oi
l
0.7L to 1.0L
Main hydraulic system
Maximum press
ure
130 bar
Air gap of the electromagnetic
brake
0.3mmto0.35mm
Brake
Install screw tightening torque
2.8 N.m
FU 10 A
FU01 60 A
FU02 60 A
FU1 10 A
Fuses
FU2 0.5A
.
113
3 801 16 01 EN - 11/2018 57
To Next Page
Loading...
