SPECIFICATION
Model: StimTec Target
Channel: Dual
TENS:
Intensity 0-150mA zero to peak at 500ohm load
Frequency 1-150 Hz
Pulse width 50, 60, 70, 80, 90, 100, 110, 120, 130,
140, 150, 160, 170, 180,190, 200, 210,
220, 230, 240, 250μs
Waveform Symmetrical bi-phase rectangular,
Asymmetrical bi-phase rectangular,
Mono-phase positive rectangular,
Mono-phase negative rectangular,
Alternated bi-phasic rectangular
Treatment timer Continuous, 15, 30, 45, 60, 90min
The PRESET program applies a sequence of 3
sub-programs Ⓐ Ⓑ Ⓒ, optimized to treat the specific
pain situation. The characters Ⓐ, Ⓑ or Ⓒ will flash,
showing the phase in use or will be ON to show the
completed phase.
Mode Constant A – Both Pulse Rate and Pulse Width
are adjustable. Default values are PR=3Hz and
PW=250μs characterized by a de-contraction effect. Use
this program if you want to relax the painful area. The
stimulation level must be set to produce a gentle
muscular contraction.
Mode Constant B – Both Pulse Rate and Pulse Width
are adjustable. Default values are PR=10Hz and
PW=150μs characterized by an endorphins stimulating
- 18 -
To Next Page
Loading...