STONEX S9i - 5.1 Status; 5.2 Information

Stonex S9i GNSS Receiver – User Manual 16
5.1 Status
In Status, you can see the current work status of the receiver, some basic
information. Such as system mode, current datalink, coordinate, satellites,
solution and so on. The detailed information you can see from the picture.
Figure 5 - 1 Status
5.2 Information
Then it’s the “Information”, this menu shows the information inside the
receiver, such as firmware version of the receiver, GNSS firmware version,
GSM mode information, sensor version, battery information and so on.
Figure 5 - 1 Information