bydash.com
Using Your Blender
MAINTENANCE
Always unplug the Motor Base before cleaning or moving the appliance.
IMPORTANT NOTE: DO NOT SUBMERGE THE MOTOR BASE INTO WATER.
Thoroughly dry the Pitcher prior to storing. Do not allow any standing water
to remain around the shaft gear if storing the Pitcher upside down. Do not
wash Pitcher in the dishwasher.
TO CLEAN YOUR BLENDER
1. Remove the Pitcher from the Motor Base.
2. Empty any extra contents of the Pitcher into the trash.
3. Fill the pitcher halfway with warm water and a few drops of dish soap.
Run the blender on the ‘smoothie’ setting or pulse a few times and then
turn the Blender on a low setting for 20 seconds. Blend for more time if
necessary. Once the cycle is nished, rinse the Pitcher with hot or warm
water. Make sure to rinse the Pitcher well before using again to eliminate
any soap residue. Dry the base of the Pitcher thoroughly and wipe with a
cloth to reduce moisture.
4. Wipe down the motor base with a damp cloth.
5. Wash the Tamper and Lid in the sink with hot, soapy water.
6. When storing the Pitcher for an extended period of time, we recommend
that you store it upside down, without the lid, to allow any residual moisture
to evaporate.
RECIPE
GUIDE & COOKBOOK
To Next Page
Loading...