Step 3: Fit edging strip (Q901EF
only)
Before inserting the appliance into the
cabinet, fit the silicon edging strip
(supplied in the oven pack) to the front
side edges of the front frame.
Trim to size.
Fitting the edging strip:
Detail:
Step 4: Secure appliance into
housing unit
Insert appliance into cabinet.
Note: The unit housing the appliance
must be appropriately fixed.
To secure the appliance to the housing
unit, open the grill / top oven door
and screw 2 screws through the top
corner holes in the front frame, ensuring
that the appliance is centrally located.
Take care not to damage the
appliance or cabinet.
34
To Next Page
Loading...
