Strand 100 Console Manual Page 11
Effect Options Buttons – these will allow the operator to change the stepping
options of the effect.
Forward – this will allow the faders that have a level to step through their
appropriate levels from the lowest number fader number to the highest.
Reverse – this will allow the faders that have a level to step through their
appropriate levels from the highest number fader number to the lowest.
Random - this will allow the faders that have a level to step through their
appropriate levels in a randomly generated order.
Bounce - this will allow the faders that have a level to step through their
appropriate levels from the lowest number fader number to the highest then
back to the lowest number fader.
LED Display – this will show alpha / numeric information about the console. Such
as fade time, effect step rate and whether the black out button is active.
LED Lights – all channel faders have LEDs that mimic the output level of each
fader. LEDs also are indicators of the channel mode as well as when all features are
activated. All LEDs are green.
Black Out Button – this will allow the operator to instantly stop all fader output.
Press again to restore fader output.
To Next Page
Loading...
