Page 16 Strand 100 Console Manual
Effect – Two Scene Mode
To run the effect in two scene mode, just switch the channel mode to two scene.
(Check the LED for indication of the appropriate mode setting). Now all of the fader
levels from the bottom fader bank will become the faders in the effect. With both
playbacks in the up position, just press any of the effect directional keys and the
effect will start immediately.
Once the effect is running, adding new fader levels will add those faders into the
effect.
Conclusion
This concludes the instructional manual for Strand’s 100 series console.
To Next Page
Loading...
