13
ENGLISH
Warranty
We guarantee the utmost quality of the machine for a period of one year, calculated from
the date of invoice, such that:
• If any part should prove to become unusable during the warranty period due to material
or manufacturing defects, we will either supply an adequate replacement part at our own
discretion or repair the defect part if it is sent to our factory on our cost and with the
transporter we advice.
• The purchaser or agent shall notify us as soon as possible in the event of a warranty claim
in order to give us the opportunity to investigate and repair the defect.
• The purchaser or agent shall not repair the defect themselves on site without contacting
us first. If such a repair is made without our approval, it is made entirely at the risk of the
purchaser or agent who is then responsible for the costs.
• We take no responsibility for defects to the machine resulting from external tampering,
wear and tear, neglect or improper handling. Neither do we take responsibility for
compensating other direct or indirect costs in connection with the warranty claim.
Otherwise, the Machinery Scandinavia AB general delivery terms apply, as well as the
General Delivery Terms NL 92 and Orgalime S 2000.
Instruction and Spare Parts List
This is your copy of the instructions and spare parts list for the drilling machine. It has been
prepared for those using the machine or who are responsible for its maintenance and service and
should therefore be made readily available for all those concerned.
Read through the manual carefully before installing the machine and starting it up.
The machine is of simple design and robustly built, but we cannot guarantee perfect function if it
is incorrectly handled.
It is therefore necessary to make yourself thoroughly acquainted with its functions and to carry
out practical tests on the various parts in the control system and the machine settings. Once these
are mastered, the excellent properties of the machine can be fully utilized and the component
parts will give maximum service life.
Every machine is tested for accuracy and capacity at the factory. Experienced staff checks both
the mechanical and electrical functions according to a standardized programme, meaning that we
can guarantee workmanship of the highest and most consistent quality.
By following our directions and your own good judgement, we are convinced that your new
machine will give every satisfaction. However, should any problems arise, please do not hesitate
to contact our dealer or us.
To Next Page
Loading...