EasyManua.ls Logo

STRATOS 25 - 6.3 STRATOS Programmer

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Installation of the system
16
This programmers will provide you with information concerning
the operation of the system, as well as allowing you to set up
all parameters.
MAIN FEATURES:
User-friendly and intuitive programming.
Multicolour interactive digital display.
Holiday Mode
Here the desired regeneration can be chosen by time, de-
layed, immediate or mixed.
MULTICOLOUR LCD DISPLAY: It shows the information concer-
ning the state of the system. Depending on each moment, the
display will show different types of messages:
Service: It offers information concerning the operation of the system.
15:57
Last Regen. : jul. 01, 2012
Mode: Meter Override
Capacity
Remaining
Flow
Rate
Regeneration: It shows the regeneration stage of the system and
the remaining time. It shows as well the current time.
21:02
Advancing to
Backwash
Programming: It shows the internal parameters and allows its
modification.
Time Region &
Language
Hardness &
People
Holiday
Mode
Advanced
Settings
System
Information
THREADED PIPE
1. Apply a sealing paste for pipes or Teflon tape on all male
threaded pipes.
2. Tighten all threaded connections.
CPVC PLASTIC PIPE
1. Clean, prepare and glue all joints according to the
manufacturer’s instructions.
OTHER
Please follow the instructions from the pipes’ manufacturer
when using other types of pipes and fixtures approved for
drinking water.
INSTALLATION OF THE DRAIN
Measure and cut the necessary length, and then connect the
drain line of ½” to the accessory for the drain connection of
the water softener. Fasten the hose with a clamp.
NOTE: Hook the hose of the drain to the underground dra-
in. Tighten the drain hose. This will prevent any pipe whip
during regenerations.
HOW TO INSTALL THE ELBOW OF THE OVERFLOW
DRAIN OF THE SALT TANK
Connect the overflow drain elbow from the system to a near
drain. This drain intake must be at a lower height than the
overflow drain.
NOTE: The overflow hose must be installed in such way
that water cannot return from the drain hose.
6.3 STRATOS Programmer
DESCRIPTION OF THE PROGRAMMER
All systems have a built-in state-of-the-art electronic program-
mer with a multicolour interactive display. This advanced con-
troller allows to fully monitor the operation of the system. The
display is installed on the upper part of the compact cabinet.

Related product manuals