User Manual for X7-E1608
For more information, please visit our website www.en.streamaxtech.com
1) Electrical Apparatus Safety
All installation and operation should comply with local electrical safety norms.
In the process of transportation, storage and installation, please avoid heavy stress, violent vibration,
impact and water splashing.
Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the
equipment before the MDVR installation is finished.
4) Requirements on Engineers & Technicians
All the work of checking and maintenance should be done by qualified technicians and engineers.
We do not undertake any responsibility caused by unauthorized modifications.
5) Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight,
flammable or explosive substances, etc. Keep gaps not less than 3cm around the device to facilitate
ventilation for cooling.
Make sure to use accessories from the manufacturer recommended in the attachment.
Insulate circuit ground and metal shell for all the peripherals.
Before installation, please open the package and ensure that all parts are included.
If there are any problems, please contact us as soon as possible.
Description
Term Description Term Description
MDVR Mobile Digital Video Recorder LAN LAN Network
FPS Picture Frames Per Second MPEG Picture Format
GPS Specially for Antenna of GPS System TCP/IP TCP/IP Protocol
HDD Hard Disk for Recording USB USB Flash Interface
IR Remote Control IR Receiver DB44 A/V Input, Output.IO/ALARM Output
DB26 Alarm Input/RS232/RS485 UPS Power to Switcher and MDVR
To Next Page
Loading...
