To Next PageTo Next PageWhat to do if the remote control of my Strong SRT 40FZ4013N LED TV does not work?
If the remote control for your Strong LED TV isn't working, try these steps: * Replace the batteries. * Ensure the batteries are installed correctly. * Check that the main power is connected.
Why is there normal picture but no sound on my Strong SRT 40FZ4013N?
If your Strong LED TV has a normal picture but no sound, try the following: * Press the volume up button to increase the volume. * Ensure the volume isn't muted by pressing the mute button (!). * Try changing the sound system. * Be aware that a broadcasting failure may be the reason.
What to do if there is no picture but normal sound on Strong SRT 40FZ4013N?
If your Strong LED TV displays no picture but has normal sound, try these solutions: * Adjust the brightness and contrast settings. * Consider the possibility of a broadcasting failure.
What causes snowy dots, blocking, and interference on Strong LED TV?
If you are seeing snowy dots, blocking, and interference on your Strong LED TV, and your antenna is in a fringe area with a weak signal, try these steps: * Adjust the position and orientation of the indoor/outdoor antenna. * Check the antenna connection. * Fine-tune the channel. * Try another channel.
How to fix no colour on Strong SRT 40FZ4013N?
If your Strong LED TV has no color, here are a few things you can try: * Change the color system. * Adjust the saturation. * Try another channel.
What causes unordered ripples on the picture of Strong SRT 40FZ4013N?
Unorderly ripples on the picture of your Strong LED TV are usually caused by local interference from sources like cars, daylight lamps, and hair dryers. Adjusting the antenna may minimize the interference.
General