To Next PageTo Next PageWhat causes bad picture during rain on Strong LED TV?
Heavy rain can weaken satellite signals, leading to blocking errors on your Strong LED TV. Ensure your dish installation meets standards to minimize the effects of rain.
Why is my Strong SRT 43UC4013 LED TV showing no or weak signal?
If your Strong LED TV is displaying no signal, a weak signal, or experiencing intermittent reception, it could be due to several reasons: - Cables might have loosened. - Moisture might have entered the cables or connectors. - Heavy rain or storms may be affecting the signal. - The satellite dish is not pointing at the correct satellite. - The satellite dish is too small, or there are obstructions. - The signal is too strong, or the dish is oversized. To resolve this, check the cable connections, LNB, and other equipment. Adjust the dish, consider a larger dish, change the dish position, or connect a signal attenuator.
What to do if my Strong SRT 43UC4013 has no picture and no sound?
If your Strong LED TV shows no picture and produces no sound, try these steps: 1. Check the fuse or circuit breaker to ensure they are working. 2. Plug another electrical device into the outlet to verify it's functioning and turned on. 3. Ensure the power plug is securely connected to the outlet. 4. Verify the signal source.
How to fix no sound on Strong LED TV?
If your Strong LED TV has a normal picture but no sound, try the following: 1. Press the volume up button to increase the volume. 2. Check if the volume is muted and, if so, press the mute button to restore the sound. 3. Try changing the sound system. 4. Be aware that a broadcasting failure may be the cause.
How to fix snowy dots or interference on Strong SRT 43UC4013?
If you're experiencing snowy dots, blocking, or interference on your Strong LED TV, it could be due to the antenna being in a weak signal area. Try these steps: 1. Adjust the position and orientation of your indoor/outdoor antenna. 2. Check the antenna connection. 3. Fine-tune the channel. 4. Try another channel. Broadcasting failure may also be the cause.
What to do if Strong SRT 43UC4013 LED TV remote control does not work?
If the remote control for your Strong LED TV is not working, try the following: 1. Replace the batteries. 2. Ensure the batteries are installed correctly. 3. Check that the main power is connected.
What causes picture freeze when playing video on Strong LED TV?
If you experience picture freeze, macro blocks, or similar distortion when playing video, especially HD content, on your Strong LED TV, it could be due to the read/write speed of your USB device being too low. Ensure you are using a USB storage device with sufficient speed and space. Pen drives (USB sticks) may not provide sufficient speed.
What causes unorderly ripples on the picture of Strong LED TV?
If you are seeing disorderly ripples on the picture of your Strong LED TV, it is likely due to local interference. Try adjusting the antenna to minimize the interference.
General| Screen Size | 43 inches |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Display Type | LED |
| Smart TV | Yes |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Bluetooth | No |
| Audio Output | 20W |
| Tuner | DVB-T2/C/S2 |
| Refresh Rate | 60Hz |
| Operating System | Android TV |
