37. 8 Press to play the next le.
38. 6 Press to fast forward.
39. 5 Press to fast reverse.
40. COLOUR BUTTONS
Press to execute the prompt function in TV or DTV menu mode.
2.6 Installing the batteries
Fig.5
Place 2 x DC1.5V batteries in the battery compartment of the remote control. Make sure to match the
polarity markings inside the compartment.
NOTE: Pictures are only for reference. Actual items may diff er.
1. Slide the cover horizontally.
2. Put 2 x DC1.5V batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.
Precautions fo r using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insuffi cient which aff ect the use range, you should replace it with
a new battery. Remove the batteries from the remote control unit if you do not intend to use it
for a long time.
3. Do not use diff erent types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into re, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
2.7 Using the r emote control
Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.
3.0 FIRST TIME INSTALLATION
After all connections have been properly made, switch on your TV. The language se lection will appear on
screen. Use to select the OSD Language of your preference. Con rm with OK on your remote
control.
The next screen appears with the Mode Selection to select Home Mode or Shop Mode. Press OK and
to con rm.
Then the next screen appears with the tuner selection. Choose the one you like to use.
7
English
To Next Page
Loading...
Need help?
General
