Colour Adjust the saturation of the colour based on your own preference.
Tint No function
Sharpness Adjust the peaking in the detail of the picture.
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press to select Colour Temperature, then press OK to enter a sub-menu. Press to select the
relevant picture eff ect (DEFAULT: Cold Normal Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.2.3 Noise Reduction
In this menu you can lter out and reduce the image noise and improve picture quality. Press to
select Noise Reduction, then press OK to enter a sub-menu.
O Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.
5.3 Sound menu
Sound Mode S elect your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and User.
Bass Adjusts the lower frequency of the sound.
Treble Adjusts the higher frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker
(earphone).
Auto Volume Adjust the volu me corresponding to the input audio level. Options are On
and O .
Surround Sound Turns on the Sound Retrieval System.
AD Switch Tur n on the Au dio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)
S/PDIF Mode I f you have con nected S/PDIF output to digital home audio system. You can
select “Auto” to output Dolby audio automatically. If channel have this audio
channel.
5.4 Channel
Press MENU to display the main menu. Press to select Channel in the main menu. Press to
select the option you wish to adjust in the Channel menu.
10
To Next Page
Loading...
Need help?
General
