To Next Page
T
Tiffany CrossAug 6, 2025
How to reset channel lock code on Strong SRT 55?
- DDenise RichardsAug 6, 2025
To cancel the channel lock on your Strong TV Receiver when you've forgotten the code, re-install the channels.
How to reset channel lock code on Strong SRT 55?
To cancel the channel lock on your Strong TV Receiver when you've forgotten the code, re-install the channels.
What to do if Strong SRT 55 TV Receiver remote control not working?
If your Strong TV Receiver isn't responding to the remote, there are several things to check: * Ensure the receiver is plugged in and turned on. * Aim the remote directly at the IR sensor on the receiver. * Make sure nothing is blocking the IR sensor. * Try replacing the batteries in the remote.
Why does my Strong TV Receiver say no signal?
If your Strong TV Receiver displays a 'No signal found' message, the issue might be with your aerial. Check the aerial lead to ensure it's properly connected. Also, inspect the aerial for any damage or misalignment. If you are using an active antenna, make sure the receiver’s Antenna Power is switched ON or connect an external feed. If the problem persists, check with your dealer to ensure you are in a digital signal area.
How to fix Strong TV Receiver with no picture or sound?
If you're getting no picture or sound from your Strong TV Receiver, first, ensure that your TV is set to the correct input (Scart/ AV). Also, verify that both the TV and VCR (if applicable) are properly connected to the mains and switched on.
What to do if Strong SRT 55 shows scrambled channel message?
If your Strong TV Receiver is displaying a 'Scrambled channel' message, it simply means that the channel you're trying to watch is scrambled. In this case, select an alternative channel.
What to do if Strong SRT 55 TV Receiver IR sensor light not lit?
If the IR sensor light on your Strong TV Receiver is not lit, check the following: ensure the mains lead is plugged in and the multipoint connector is switched on. Check the mains fuse. Also, verify the connection of the IR sensor plug.
What to do if after moving Strong SRT 55 to another room I am no longer able to receive digital reception?
If you're experiencing digital reception issues with your Strong TV Receiver after moving it to another room, it could be due to the aerial feed coming through a distribution system, which might reduce the digital signal. Try using a direct feed from the antenna.
General| USB Port | 1x USB 2.0 |
|---|---|
| Video Decoder | MPEG-2/MPEG-4/H.264 |
| Audio Decoder | MPEG-1 Layer I/II, MPEG-2 Layer II |
| Connectors | HDMI, SCART, USB |
| USB Function | Software update, Media playback |
| Digital Audio Output | S/PDIF coaxial |
