Strong SRT 5400 User Manual

STRONG HD STB User’s Manual
IMPORTANT SAFETY INFORMATION
1
All safety and operating Instructions should be read before the product is operated.
All warnings on the product and in the operating instructions should be adhered to.
Do not use this apparatus near water.
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaning products.
Do not block any of the ventilation openings.
Do not install near any heat sources.
Do not defeat the safety purpose of the polarized or grounding-type plug.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel.
The SRT 5400 should be installed 10cm away from a wall to allow for the Power Switch and
Power Lead on the back panel
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified
service personnel.
This symbol indicates dangerous voltage inside the product that
presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the
product.

Strong SRT 5400 Specifications

General

Type	Digital Satellite Receiver
Aspect Ratio	4:3, 16:9
Ethernet	No
Input Frequency Range	950 ~ 2150 MHz
FEC	1/2, 2/3, 3/4, 5/6, 7/8
Audio Decoding	MPEG-1 Layer 1, 2
Composite Output	Yes
Audio Output	Stereo
DiSEqC	1.0, 1.2
Video Decoding	MPEG-2
Connectors	LNB IN

Summary

Important Safety Information

Introduction

Front Panel View

Rear Panel View

Remote Control Buttons

Installation

Video Connection Options

Details YPbPr, VGA, DVI-I, and S-Video connection methods for STB to TV.

DTV Specific Menu Operations

Information Panel

Explains how the Information Panel displays program details, channel status, and advisory ratings.

Program Guide

Shows program schedules and allows navigation, selection, and tuning of programs.

Service Menu Operations

Covers audio track selection, teletext, subtitle, time settings, and factory defaults.

Setup Menu Operations

Details display modes, aspect ratio, screen modes, audio settings, and scanning options.

Parental Guide Setup

Guides users on setting up parental controls, including password entry and blocking content.

Configuration Universal Remote Control Unit

Menu Map

Technical Specifications

Troubleshooting Guide

Provides solutions for common problems like no picture, no sound, or bad reception.

Terrestrial Input Signal Specifications

Lists specifications for signal input, frequency, impedance, bandwidth, modulation, and sensitivity.

Video and Audio Specifications

Details video algorithms, display types, frame rates, and audio output formats.

Rear Panel Connector Specifications

Audio Output Connector Details

Specifies labels, meanings, connectors, and comments for audio output ports.

Video Output Connector Details

Details specifications for Composite, S-Video, and DVI-I video outputs, including pin assignments.