How to reset forgotten channel lock code on Strong TV Receiver?
To cancel the channel lock on your Strong TV Receiver if you've forgotten the code, reinstall the channels. The default PIN is 1234.
What to do if Strong TV Receiver remote control not working?
If your Strong TV Receiver remote isn't responding, first, ensure the receiver is plugged in and turned on. Then, aim the remote directly at the front panel, removing any obstructions. Finally, replace the remote batteries if they are exhausted.
What to do if Strong TV Receiver shows scrambled channel message?
If you see a 'Scrambled Channel' message on your Strong TV Receiver, try selecting an alternative channel. If that doesn't work, insert your provider's smartcard with the chip side down.
Why no picture or sound on Strong TV Receiver?
If you have no picture or sound on your TV from the Strong TV Receiver, ensure that the correct HDMI input is selected on your TV or amplifier. Also, make sure your TV is switched on. If the issue persists, select a lower resolution on the receiver.
How to fix no signal on Strong TV Receiver?
If your Strong TV Receiver shows 'No Signal Found', check that the aerial is properly connected. Also, inspect the aerial for any damage or misalignment. If you are out of the digital signal area, contact your dealer. As an alternative, switch the receiver’s Antenna Power ON or connect external power for active antennas.
Why is the LED indicator not lit on my Strong TV Receiver?
If the LED indicator on your Strong TV Receiver is not lit, check that the mains lead is plugged in. If it is, check the mains fuse.
What to do if Strong TV Receiver has no digital reception after moving?
If you are no longer able to receive digital reception on your Strong TV Receiver after moving it, the antenna signals may be too weak. Press the INFO button on the remote control three times to view the signal bars. Adjust the antenna for maximum reception or rescan the channels.
General| Brand | Strong |
|---|---|
| Model | SRT 8903 |
| Category | TV Receiver |
| Language | English |
Essential safety precautions and warnings for using the digital TV receiver.
Instructions and symbols for correctly setting up the receiver and associated equipment.
Recommendations and warnings for using USB storage devices with the receiver for recording and playback.
Details the default PIN code for accessing receiver functions and settings.
Overview of the remote control functions and button assignments for operating the receiver.
How to connect a terrestrial antenna to the receiver for signal reception.
Instructions for connecting the receiver to an HD TV using an HDMI cable for best quality.
Method for connecting the receiver to a TV using a SCART cable for standard definition.
Connecting the receiver to a digital amplifier via S/PDIF for multi-channel audio.
Connecting to digital amplifiers and TVs with HDMI for improved audio and video quality.
Details on connecting USB storage devices for recording and playback functions.
Functionality to pause live broadcasts and resume playback later using a USB storage device.
Setup procedures for scanning channels, adjusting antenna, and configuring numbering.
Configuration menu for language, TV system, time, parental lock, and other system settings.
To Next Page
