19
PART 2 • English
English
WARNING: After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
7.4.5 Remove USB device safely
Select Remove USB device safely from the tools menu and press OK. The receiver will display a
message indicating that you can safely remove your storage device from the receiver. This can only be
done if the receiver is not recording or is not in timeshift mode.
NOTE: After performing this action, the USB device is no longer accessible from your
receiver. To gain access to your storage device again, re-insert it or switch the
receiver to standby and on again.
7.5 Games
Your receiver is equipped with two games which can be played on your TV screen using the receiver
remote control.
Use pq to select Game from the main menu and press OK or u to proceed.
Select one of the available games (Othello or Sudoku) with pq and press OK to start the game.
Follow the directions on screen.
Use EXIT to quit a game.
7.6 Media+
The Media+ menu consists of the following submenus: Media Player, Record Manager, DVR HDD
Information, HDD Format and DVR Configuration
Use pq to highlight a menu and press OK to enter.
Press EXIT to quit.
7.6.1 Media Player
This function allows you to play MPEG, AVI, MP3, JPG and many other type files from a connected
storage device (see details in the technical part).
Select Media Player from the Media+ menu and press OK to proceed.
Use pq to browse the connected USB device and use OK to open folders. Press OK to play the
highlighted selection.
The help banner at the bottom of the screen explains all buttons used in the Media player. Press EXIT
to quit.
NOTE: You can also access the Media Player from viewing mode with the FILE key on
the remote control.
To Next Page
Loading...
