15
PART 2 • English
English
7.3.1 Language
This menu allows you to set up your language preferences.
Language: Use tu to select language for the On Screen Display.
First Audio: Use tu to select audio language.
Second Audio: Use tu to select a language that will be played when the language selected
in First Audio isn’t available.
Subtitle Language: Use tu to select subtitle language.
Subtitle: Use tu to select subtitle type to be displayed automatically. The options are
Normal, Hard of Hearing and Off
Teletext: Use tu to select teletext language (when available.)
7.3.2 TV System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution: Toggles between 576i up to 1080p. Please use a setting that matches your
TV’s specifications. After a selection has been made, you will be asked to
confirm. Note: Selection is only applicable on HDMI. You will be asked to
confirm the new setting. If not confirmed within 15 seconds, the resolution
will fall back to the previous state.
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV)
and 16:9 (use this setting for 16:9 TV sets).
Connection: Use this option to select the connection to your TV set. Select HDMI or
TV SCART.
Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all audio
will be converted to stereo audio. Bitstream enables multi-channel audio on
the digital output for use with a home theatre set.
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region: Use tu to select the region you live in.
GMT Usage: Set to On for broadcaster defined time or to Off to input time and date
manually.
GMT Offset: Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to On. The GMT Offset range is “-11:30 ~ +12:00”,
increasing by half hours progressively. Some cities matching the set GMT
Offset are displayed at the bottom of the screen.
Summer Time: Select Off or On to add one hour extra for summer time during the summer.
Date: Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Time: Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Time Display Setting to On, the time will be displayed constantly on screen.
To Next Page
Loading...
