4
PART 2 • English
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please
follow these instructions carefully:
Refer to the user manual of your TV and your antenna.
Make sure that the Audio/Video connectors and outdoor components of the antenna
are in a good condition and the Audio/Video connections are well shielded.
This manual provides complete instructions for installing and using this receiver.
The following symbols will serve as follow.
WARNING: Indicates a warning information.
NOTE: Indicates any other additional important or helpful information.
MENU Represents a button on the remote control
(Bold Characters)
Move to Represents a menu item within a window
(Italic Characters)
1.4 Accessories
1 User Manual
1 Remote control unit
2x Batteries (AAA type)
NOTE: The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend using
(e.g. NiMH) types with low self-discharge to ensure long time operation of
remote control.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the
receiver would not work properly.
STRONG cannot guarantee compatibility to all types of USB storage devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before using it
with this receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.
Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB device
via your receiver.
To Next Page
Loading...
