To Next PageTo Next PageWhat to do if Strong TV Receiver says no signal?
If your Strong TV Receiver displays a 'no signal' message, the issue might be with your antenna connection, damage, or alignment. Check the antenna lead and the antenna itself. You might be out of the digital signal area, in which case you should check with your dealer. Also, if you're using an active antenna, ensure that the antenna power is switched on or that external power is connected.
Why Strong TV Receiver remote control is not working?
If your Strong TV Receiver isn't responding to the remote, several factors could be the cause. First, make sure the receiver is plugged in and turned on. Ensure that you're aiming the remote directly at the front panel of the receiver, without any obstructions. Finally, try replacing the batteries in the remote control.
How to fix Strong TV Receiver when there is no picture or sound?
If you're not getting any picture or sound from your Strong TV Receiver on your TV or amplifier, ensure that the correct HDMI or SCART input is selected on your TV or amplifier. Also, verify that your TV or amplifier is switched on. Check the S/PDIF connection if it is in use. The unit might be set to a higher resolution than your TV supports.
What to do if Strong TV Receiver lost signal after moving?
If you've moved your Strong TV Receiver and are no longer getting digital reception, the antenna signals may be too weak. Press the INFO button on the remote control to view the signal bars on screen and adjust the antenna for maximum reception. You can also try rescanning the channels. If you're using an active antenna, ensure the antenna power setting is On. Consider using an outdoor antenna.
How to troubleshoot Strong SRT 8213 when LED is off?
If the LED indicator and LED display on your Strong TV Receiver are not switching on, the issue might be that the mains lead is unplugged or the power switch at the rear panel is set to OFF. Check the mains plug to ensure it is properly connected. Then, switch the main power to ON.
Why Strong TV Receiver video playback is distorted?
If video playback on your Strong TV Receiver is causing picture freeze, macro blocks, or distortion, especially with HD content, the read speed of your USB device could be too low. Ensure you're using a USB storage device with sufficient speed and space. Note that pen drives (‘USB sticks’) may not provide sufficient speed.
Why does my Strong SRT 8213 turn off by itself?
If your Strong TV Receiver switches off automatically, the Auto Standby function may be enabled. You can disable this function.
What does 'scrambled channel' mean on Strong TV Receiver?
If you're seeing a 'scrambled channel' message on your Strong TV Receiver, it means the channel you're trying to watch is scrambled. Select an alternative channel.
General| Aspect ratio | 4:3, 16:9 |
|---|---|
| Signal source | Ethernet (RJ-45), Terrestrial |
| Video resolutions | 1280 x 720, 1920 x 1080 pixels |
| Supported video modes | 576i, 576p, 720p, 1080i, 1080p |
| Digital signal format system | DVB-T2 |
| Personal Video Recorder (PVR) included | Yes |
| Audio formats supported | AC3, PCM |
| Video formats supported | H.264, H.265, HEVC, MPEG2, MPEG4 |
| Wi-Fi | No |
| USB 2.0 ports quantity | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Tuner type | Digital |
| Demodulation | 16-QAM, 64-QAM, 128-QAM, 256-QAM, QPSK |
| Product color | Black |
| Audio decoders | Dolby Digital Plus |
| Number of tuners | 1 tuner(s) |
| Channels quantity | 700 channels |
| Audio output channels | 2.0 channels |
| Storage temperature (T-T) | -10 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| AC input voltage | 100 - 240 V |
| Power consumption | 1000 mA |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 12 W |
Weight and Dimensions| Depth | 55 mm |
|---|---|
| Width | 175 mm |
| Height | 42 mm |
| Weight | 130 g |
Contact details for Austria.
Contact details for Bulgaria.
Contact details for Central Eastern Europe.
Contact details for Germany.
Contact details for Denmark.
Contact details for France.
Contact details for Italy.
Contact details for Netherlands.
Contact details for Poland.
Contact details for Ukraine.
Important guidelines for safe installation and handling of the receiver.
Guidelines for proper storage and transportation of the receiver and accessories.
Recommended steps and symbols for setting up the receiver.
Lists the included accessories with the receiver.
Recommendations and warnings for using USB storage devices with the receiver.
The default PIN code for accessing receiver settings and menus.
Description of the controls and indicators on the front panel.
Description of the connectors and ports on the side panel.
Description of the connectors and ports on the rear panel.
Explanation of the buttons and functions of the remote control.
Instructions for inserting batteries into the remote control.
Guidance on how to operate the receiver using the remote control effectively.
How to connect a terrestrial antenna for receiving broadcast signals.
Instructions for connecting the receiver to a TV using an HDMI cable.
Instructions for connecting the receiver to a TV using a SCART cable.
How to connect USB storage devices for playback and recording.
Steps to connect to a router for accessing RSS feeds and weather forecasts.
Guide on connecting the receiver to the mains power supply.
Connecting to audio amplifiers or home cinema sets via S/PDIF or HDMI.
Guide through the initial setup wizard including language, region, and connection settings.
Adjusting antenna power and channel settings for optimal signal reception.
Performing a scan for available channels after initial setup.
A brief guide to basic receiver operations like turning on/off and changing channels.
Describes features for watching TV and navigating menus.
Methods for changing channels using direct access or the channel list.
Displaying current channel and event information.
How to select different audio streams or languages for channels.
Accessing and using the Teletext service.
Options for selecting and displaying subtitle languages.
Using the EPG to view schedules, programme info, and set timers.
How to use recording, timeshift, and format USB devices.
Setting timers for recording programmes via EPG or Timer menu.
Playing back recorded files from a USB storage device.
Accessing and managing channel installation and search options.
Performing a manual search for channels by frequency or channel number.
Automatically searching for channels across all available frequencies.
Displays receiver and channel information, useful for support.
Resetting the receiver to factory default settings, clearing all data.
Managing channels, favourite lists, locking, and deleting channels.
Tools for creating favourite lists, ordering, locking, and deleting channels.
Adding channels to up to four different favourite groups.
Moving channels within the channel list, especially for LCN regions.
Protecting channels with a PIN code to prevent unauthorized viewing.
Permanently deleting channels from the main channel list.
Managing radio channels, favourite lists, locking, and deleting.
Accessing the Electronic Programme Guide (EPG) for schedule information.
Configuring various receiver settings for language, display, and audio.
Setting preferences for On Screen Display (OSD) and audio/subtitle languages.
Adjusting HDMI resolution, aspect ratio, and audio output settings.
Enabling audio description and adjusting its volume for visual impairment.
Configuring general receiver settings like Auto Standby and Channel Update.
Setting up PIN codes to lock menus and channels based on age ratings.
Setting the receiver's time zone for accurate clock and scheduling.
Setting up timed events for waking the receiver or recording programmes.
Playing back various media files (video, music, pictures) from USB devices.
Controls for playing back media files (movies, music, pictures).
Configuring settings for Timeshift and recording functions.
Managing USB storage devices, including safe removal and formatting.
Configuring internet connection settings, DHCP, and IP addresses.
Reading news feeds and managing RSS links.
Checking weather forecasts for your region via the network connection.
Instructions for updating the receiver software using a USB device.
Lists common issues like no signal, no picture, and remote control problems with solutions.
Addresses issues like forgotten PIN, signal loss, auto standby, and playback errors.
Details on tuner input connector, frequency range, and signal level.
Information on demodulator type, transmission mode, and guard intervals.
Video resolution, decoding standards, aspect ratio, and conversion.
Supported audio formats and decoding standards.
Supported video and audio file formats for multimedia playback.
Lists all available connectors on the receiver unit.
Physical and operational data including power, temperature, and dimensions.
