EasyManuals Logo

Strong SRT 8213 User Manual

Strong SRT 8213
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
English
3.0 CONNECTION
3.1 Connecting to a terrestrial antenna
Fig. 7
To receive broadcast signals, your terrestrial indoor or outdoor antenna must be connected to the
ANT IN connector on the back of the receiver. Use a proper shielded antenna cable and suitable
connectors.
NOTE: If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which
can be pointed towards the transmission tower. Ask your local dealer for
more information. If you are using an active antenna with built-in antenna
amplifier, switch the antenna power to ON in the menu Manual Search.
3.2 Connecting to TV with HDMI cable
Fig. 7
The TV set shall be connected to the receiver using a good quality HDMI cable. This connection gives
the highest possible picture quality.
3.3 Connecting to TV with SCART cable
Fig. 7
Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
3.4 Connecting a USB storage device
Fig. 7
This port can be used for USB storage devices such as USB pen drives or HDD with a maximum peak
current of 500 mA. It is recommended to use USB 2.0 storage devices (or higher) for playback of video
files or HD movies.
3.5 Connecting to Ethernet for RSS feeds and weather
forecasts
Fig. 8
To use this option of your receiver it must be connected to your router. Connect the Ethernet (RJ-45)
connector with a class CAT5E (or higher) cable to your router.
3.6 Connection to main power supply
Fig. 8
After all the connections are done you can connect your digital receiver to the mains power.
Make sure that the main power switch on the rear panel is set to ON.
7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Strong SRT 8213 and is the answer not in the manual?

Strong SRT 8213 Specifications

General IconGeneral
Aspect ratio4:3, 16:9
Signal sourceEthernet (RJ-45), Terrestrial
Video resolutions1280 x 720, 1920 x 1080 pixels
Supported video modes576i, 576p, 720p, 1080i, 1080p
Digital signal format systemDVB-T2
Personal Video Recorder (PVR) includedYes
Audio formats supportedAC3, PCM
Video formats supportedH.264, H.265, HEVC, MPEG2, MPEG4
Wi-FiNo
USB 2.0 ports quantity1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Tuner typeDigital
Demodulation16-QAM, 64-QAM, 128-QAM, 256-QAM, QPSK
Product colorBlack
Audio decodersDolby Digital Plus
Number of tuners1 tuner(s)
Channels quantity700 channels
Audio output channels2.0 channels
Storage temperature (T-T)-10 - 50 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %
AC input voltage100 - 240 V
Power consumption1000 mA
AC input frequency50 - 60 Hz
Power consumption (standby)1 W
Power consumption (typical)12 W
Weight and Dimensions IconWeight and Dimensions
Depth55 mm
Width175 mm
Height42 mm
Weight130 g

Related product manuals