Strong SRT 5400 - Technical Specifications; Troubleshooting Guide; Terrestrial Input Signal Specifications

STRONG HD STB User’s Manual
TECHNICAL SPECIFICATIONS
32
Trouble Shooting
Problem
No picture no OSD
No picture or sound but OSD
is available
Bad reception
No sound but video only
Possible resolution
Make sure power cord is plugged in.
Make sure power is on.
Make sure all cables are connected properly.
Make sure all cables are connected properly.
Make sure antenna cable is functioning properly.
Make sure antenna cable is functioning properly.
The channel you are watching may have a weak signal.
Make sure all cables are connected properly.
Volume is set too low.
Technical Specifications
Terrestrial Input Signal
Input Frequency
Input Impedance
Band Width
Modulation Type
Signal Sensitivity
Video
Algorithm
Display Video Type
Display Frame Rate
Video Output 1
Video Output 2
VHF/UHF 5~69
170MHz ~ 860MHz
75 Ω 162-2 male/female – PAL IEC
7 MHz
DVB-T
43.5 dBµV(UHF)
35.4 dBµV(VHF HIGH)
35.4 dBµV(VHF LOW)
MPEG-2 compatible Main Profile@High Level
1080i / 720p / 576p and 576i for 25Hz selectable
25/50 Hz
Composite (RCA) – SMPTE-170M
S-Video (Mini DIN) – SMPTE-170M