PART 1 • English
7
English
3.0 CONNECTIONS
3.1 Connecting to TV & VCR
Basic connection with a Scart cable (Fig. 3)
1. Connect the satellite signal from the LNB to the LNB IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART IN connector
on your TV set.
Basic connection with a RCA cable (Fig. 4)
1. Connect the satellite signal from the LNB to the LNB IN connector.
2. Connect the Video RCA connector at the back of the receiver to the Video IN RCA
connector on your TV set.
3. Connect the Audio Left and Right RCA connectors at the back of the receiver to the Audio
Left and Right IN connectors on your TV set or audio amplifier.
Advanced connection of the receiver to the TV set and VCR (Fig. 5)
1. Connect the satellite signal from the LNB to the LNB IN connector.
2. Connect the TV scart connector at the back of the receiver to the scart-in connector on
your TV set.
3. Connect the VCR scart connector at the back of the receiver to the scart-in connector on
your VCR.
3.2 Connecting to Digital Audio Amplifier
Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the receiver. (Fig.6)
3.3 Connecting to Satellite Dish
Connecting a fixed satellite dish to your receiver (Fig. 7)
First choose a satellite you want to receive your signals from, and have your dealer aim your dish at
the requested satellite.
Connect a coax cable to your LNB and the other end directly to the LNB IN connector of your receiver.
Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch (Fig. 8)
If you want to watch programs from more than one satellite (For example from Astra and from
HotBird) it is advisable to use fixed dishes and a DiSEqC 1.0 switch. Have your Dealer aim the
dishes at the requested satellites and connect the LNB’s with coax cables to the IN connectors
of the DiSEqC 1.0 switch. Connect the OUT connector of the DiSEqC 1.0 switch to the LNB IN
connector at the back of your receiver.
To Next Page
Loading...
