Why does my Strong DVR TV have no image?
If your TV displays no image when connected to the Strong DVR, ensure the TV is properly connected to the DVR via the VIDEO OUT or HDMI terminal. Also, verify that the AV selection on your TV is correctly set to the appropriate input.
How to fix Strong DVR remote control that doesn't work normally?
If your Strong DVR remote control isn't working, make sure you're aiming it directly at the receiver on the front panel. Remove any obstacles between the remote and the DVR. If it still doesn't work, try replacing the batteries with new ones.
What to do if my Strong DVR has no audio?
If you're not getting any sound from your Strong DVR, first check the audio signal connections between the DVR and any external devices to ensure they are properly inserted. Next, verify that the audio output settings are correctly configured in the 'Main menu – Audio' settings. If you have a power amplifier connected, check its input mode settings as well.
How do I fix a Strong DVR with no HDMI output?
If your Strong DVR has no HDMI output, check that the HDMI connection between the player and the external device is firmly in place. If it's loose, insert it properly. Also, ensure your TV supports the HDMI output resolution (720p/1080i/1080p/1080p24) and adjust the output resolution accordingly.
What to do if my Strong DVR image is frozen?
If the image on your Strong DVR is frozen and the operation is invalid, cut off the power supply, reconnect it, and then press the Power key on the remote control to restart the player.
How to fix Strong DVR when video output resolution is too low?
If the video output resolution of your Strong DVR is too low, reset the resolution in 'Main menu – Display – TV'. Set the resolution according to the video output signal format of the different terminals.
What to do if my Strong DVR can’t play discs?
If your Strong DVR isn’t playing discs, first check if the disc is dirty and clean it. If the disc is clean, ensure that the area code of the disc matches the player.
How to fix Strong DVR when it can’t hear desired audio effect?
If you can’t hear the desired audio effect on your Strong DVR, go to “Main menu – Audio – Speaker” and set the speaker properly according to the connected device.
How to fix Strong DVR when it has no power supply?
Ensure that the AC outlet has electricity. Firmly insert the AC power line. Press the Power key on the front panel to turn on the player.
Why can’t I switch audio on my Strong DVR?
Some discs can’t switch audio due to differences in disc production.
Critical warnings regarding electric shock, ventilation, and liquid exposure.
Explanation of the symbol indicating double insulation for safety.
Highlights the main capabilities of the SRT 6500 unit.
Details the items included in the product package.
Identifies and describes buttons and ports on the front panel.
Details the various input and output ports on the rear panel.
Details the primary functions and buttons of the remote control.
Details the secondary functions and buttons of the remote control.
Step-by-step guide for inserting batteries into the remote control.
Important safety precautions for handling and using batteries.
Tips for achieving good digital signal reception via antenna.
Explains different methods for connecting the unit to a TV.
Instructions for connecting the unit using Video and Audio for standard definition.
Instructions for connecting via YPbPr and Audio for high definition viewing.
Instructions for connecting the unit using HDMI for high definition viewing.
Instructions for audio connections via SPDIF or Mixed Audio L/R.
How to access and navigate the channel list.
Accessing and navigating the Electronic Program Guide.
Overview of DVR menu options including Media Browser and Timer List.
Viewing HDD status and formatting options.
Configuring time shift function and duration.
Selecting storage device (HDD or USB) for recordings.
Network menu options for internet radio and PC sharing.
Instructions for Auto and Manual Channel Search.
Overview of system settings like audio/video output and aspect ratio.
Adjusting time, daylight saving, and region settings.
Configuring censorship levels and password protection for parental controls.
Viewing the unit's system information and software version.
Instructions for upgrading the unit's software using a USB drive.
Restoring the unit to its original factory default settings.
Procedures for performing Auto Search and Manual Search for channels.
Methods for navigating and selecting channels using the remote or keypad.
Displaying and clearing the channel information banner.
Navigating and selecting available subtitles.
Selecting different aspect ratio options like 16:9 and 4:3.
Navigating between available sound tracks for the current channel.
Switching between the current and previously viewed channels.
Muting and restoring the audio output.
Activating and using the Time Shift feature for live TV.
Enabling the automatic Time Shift function.
Details on passive and full standby modes and their behavior during recording.
Instructions for upgrading the unit's software using a USB drive.
Restoring the unit to its original factory default settings.
Configuring parental controls, censorship levels, and passwords.
Activating instant recording and adjusting recording duration.
Setting up timed recordings and reminders using the Timer function.
Accessing and playing recorded programs from the DVR menu.
Removing sections from recorded programs for playback skipping.
Recording programs directly from the Electronic Program Guide.
Setting up series recording to capture entire series episodes.
Transferring recorded programs or media files to a USB device.
Using the EPG in vertical display for channel and program information.
Navigating EPG data, setting reminders, and viewing program lists.
Navigating horizontal EPG, setting reminders, and viewing program data.
Performing EPG searches using keywords in vertical or horizontal modes.
Steps for searching EPG, setting reminders, and recording programs found.
Instructions for accessing and listening to internet radio stations.
Accessing media files stored on a PC via network sharing.
Steps to share folders and access PC media on Windows XP.
Steps to share folders and access PC media on Windows 7.
Detailed steps for sharing folders on Windows 7 for network access.
Configuring permissions for shared folders on Windows 7.
Adjusting local security policy for network sharing on Windows 7.
Configuring user rights assignment for network sharing on Windows 7.
Managing the guest account for network access on Windows 7.
Applying local security policy for network sharing on Windows 7.
Revisiting user rights assignment for network sharing on Windows 7.
Revisiting guest account settings for network access on Windows 7.
Finalizing local security policy for network sharing on Windows 7.
Steps to connect the receiver to a PC via Network Neighbourhood.
Proper handling procedures for Blu-ray discs.
Methods for cleaning Blu-ray discs to maintain quality.
Recommendations for storing Blu-ray discs to prevent damage.
Configuration options for screen saver, auto-play, reset, and firmware updates.
Settings for BUDA, CEC, display language, menu language, audio language, and subtitle.
Configuration options for PIP, secondary audio, memory playing, CC subtitle, and PBC.
Detailed settings for Picture-in-Picture (PIP), secondary audio, memory playback, and CC subtitle.
Settings for changing password and child lock.
Configuring child lock based on disc rating and filtering content.
Selecting country code to restrict content allowed in the local region.
Setting the aspect ratio to match the connected TV set.
Setting the video output resolution for the display device.
Setting the system for output TV signals (NTSC, PAL, AUTO).
Configuring color space, HDMI high color, and 1080P 24HZ output.
Adjusting brightness, contrast, tune, and saturation of the output image.
Configuring digital audio output format and down-sampling frequency.
Setting dynamic output compression and SACD priority.
Configuring speaker settings, test tone, and EQ for audio output.
Displaying the software version of the Blu-ray player.
Using the screen control menu for advanced playback settings and selections.
Diagnosing and resolving common problems like no power, frozen image, and remote issues.
Resolving issues such as no image, incorrect aspect ratio, no audio, and parental lock.
Resolving common problems in DTV mode like no display, no signal, or scrambled channels.
Tuner and channel decoding specifications.
Video decoding standards like MPEG-2, MPEG-4, H.264, and VC-1.
Audio decoding standards like MPEG-1, MPEG-2, and HE-AAC.
Specifications for rear panel outputs like HDMI, ANT input, Loop Out, Video, Audio, and USB.
Specifications for the front panel IR receiver and remote control category.
Specifications for input voltage, power consumption, and operation temperature.
To Next Page
General
