!
Menu Submenu Item Setting and description
Audio
System
info
Speaker
setup
Post-
processing
Software
version
Test tone
EQ
Display software version
Configuration
(select according to
connected speaker and
power amplifier)
2X (configuration when two channels are
connected)
First step: select the audio channel mode
L/R: select this option if your power amplifier is
compatible with Dolby Pro Logic;
Stereo: select this option if the player is
connected to stereo power amplifier.
Second step: select the quantity of bass:
None: select this option if there is no bass
speaker;
Single: select this option if there is bass speaker.
Third step: select the speaker to be set
If the bass quantity is “None”: you can select to
set left/right speaker;
If the bass quantity is “Single”: in addition to the
speaker, you can also set bass speaker;
Fourth step: set the selected speaker as follows:
Size: set according to speaker size, select large if
the cross section area is larger than or equals to
16cm2, or else select small;
Tuning: adjust the audio output strength of the
speaker in the range -10~10dB.
Delay: set the distance between the speaker and
the listener by 5cm in the range 0~1000cm.
More
Size: set according to speaker size, select large if
the cross section area is larger than or equals to
16cm2, or else select small;
Tuning: adjust the audio output strength of the
speaker in the range -10~10dB.
Delay: set the distance between the speaker and
the listener by 5cm in the range 0~1000cm.
OFF
Rock
Pop
Live
Dance
Confirm after upgrading.
52
BLU-
RAY PLAYER
To Next Page
Loading...
