6.7 Electronic Programme Guide (EPG)*
The Electronic Programme Guide is a very useful function that allows you to watch programme
schedules and information on screen and not to miss any important event by setting Timer for it.
Press EPG button to activate this guide. The receiver will take a few seconds to collect all the
informations of all channels. Use pq to select a channel. Use t u to scroll through programmes on
selected channel to display programme information on the screen or to book timer for it. Press BLUE
or YELLOW buttons to scroll through programmes to display programme information for the next/
previous day. Press INFO button to display detailed information for selected programme. Press EXIT to
go back to viewing mode.
* Availability of EPG data depends on broadcaster.
6.7.1 Booking a programme from EPG
Select a programme as described above. Press GREEN button. A menu with three selections will appear:
Play to book the program selected that it will be automatically tuned to the set time, Sleep to put the
receiver in standby at the set time and NULL to cancel the program selection. Press OK to confirm one
the the three options or EXIT to quit the nemu. Once you have chosen one of the two options Play or
Sleep, the chosen program will be highlighted in blue and the event will be added in the Timer list. To
consult the complete list press MENU, User Setting and finally Timer.
6.8 Favourite channels
Use the FAV button to access your favourite channel groups. Using pq select created earlier one of
available favourite groups and press OK to switch to channel list within selected group. Use pq to
select channel and press OK to start viewing it. Now you will navigate (switch channels with CH+/
buttons) only within this group. Please refer to section 8.2.2 for details on how to manage favourite lists.
NOTE: The channel list will display only the channels contained in the favourite list
selected. To back to the complete list select All
7.0 MAIN MENU
The main menu gives you access to Installation, Channel Manager, User Setting, Tools and Smartcard
Tivùsat functions. To access the main menu, press MENU in viewing mode. Throughout the main menu,
use MENU and BACK to get back to the previous screen and EXIT to quit. Throughout the Menu, use
pq to select the main menu item and OK or u to highlight the submenu of choice.
7.1 Installation
This section contains information of how to add or modify your satellite parameters, to search for
channels and programmes list. To access this section of the menu it is necessary to enter the PIN code.
7.1.1 Auto Search
All settings and changes will be saved at exitting the menu. Confirm the pop-up.
The Signal Strength and Signal Quality of the signal are displayed for your convenience while setting up,
at the top of the screen. These indicators also have the function of providing help in the alignment of the
dish during installation. If settings are correct, and satellite dish is aligned, some level should appear.
All the options in the menu are listed below:
Satellite: Select a satellite to be configured. If using the DiSEqC function, press the OK
button to access the satellite list, then press BLUE button to select two or
more satellites.
11
To Next Page
Loading...
Need help?
Demodulator
Video
Audio