Need help?Do you have a question about the Strong SRT7807 and is the answer not in the manual?
Demodulator| demodulation | QPSK, 8PSK |
|---|---|
| input symbol rate | 1 ~ 45 Ms/s |
| FEC decoder DVB-S2 QPSK mode | 1/2, 2/3, 3/4, 5/6, 7/8 |
| FEC decoder DVB-S2 8PSK mode | 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 |
Video| video standard | MPEG-2, MP@ML, MP@HL, MPEG-4, AVC/H.264 MP@L4.2, HP@L4.2 |
|---|---|
| max video resolution | 1080p |
| aspect ratio | 4:3 and 16:9 |
| video resolution HDMI | 576i/576p, 720p, 1080i, 1080p |
| video resolution SCART | PAL |
Audio| audio standard | MPEG-1, MPEG-2 layer I&II |
|---|
Tuner| tuner type | F Type, IEC169-24, Female 75ohm |
|---|---|
| input frequency range | 950 – 2150 MHz |
| signal level | -60 to -25 dBm |
| LNB power | 13/18 V DC (+/- 1 V) |
| DiSEqC version | 1.0/1.1/1.2 |
System Memory| CPU | M3528 2000DMIPS |
|---|---|
| flash memory | 28 MB NAND Flash |
| system memory | 256MB DDR3 |
Connectors| SAT IN | present |
|---|---|
| S/PDIF (coaxial) | present |
| smartcard reader | 1x, on right side panel |
| HDMI 1.4b | present |
| TV SCART | CVBS only |
| Ethernet (RJ45) | present |
| IR (infrared) | 1x38KHz IR, NEC Protocol |
| power adapter | 12 V/1.5 A |
| USB 2.0 port Type A | 1x, 5 V/500 mA (max.) supported (with duster cover) |
General Data| supply voltage | AC 100 - 240 V 50/60 Hz |
|---|---|
| input voltage | DC 12 V, 1.5 A |
| size (W x D x H) | 168 x 99 x 39 mm |
| net weight | 0.5 kg |
Overview of the SRT7807 receiver and its core features.
Guidance on storing the device and its packaging for protection.
Instructions for setting up the receiver and connecting components.
List of items included in the receiver package.
Recommendations for using USB storage devices with the receiver.
Information on setting and managing the receiver's PIN code.
Description of the receiver's front panel components.
Details about the smart card slot on the side panel.
Overview of the receiver's rear panel connections.
Identification of buttons and functions on the remote control.
Step-by-step guide for inserting batteries into the remote control.
Instructions on how to operate the remote control effectively.
Guide for connecting the satellite dish antenna and LNB.
Instructions for connecting multiple antennas using a DiSEqC switch.
How to connect the receiver to an external digital audio amplifier.
Steps to connect the receiver to a TV using an HDMI cable.
Instructions for connecting the receiver to a TV using a SCART cable.
How to connect the receiver to a home network for internet access.
Guidance on connecting the receiver to the power adapter and wall socket.
Setup of initial language, audio, and video settings.
Process for creating a new PIN code during initial setup.
Configuring LNB type, antenna type, and LNB power settings.
Guide to searching for available TV and radio channels.
Final steps of the installation wizard, including smartcard activation.
Methods for changing channels, including direct access and channel list.
How to tune to a channel using its number via the remote control.
Navigating and selecting channels from the on-screen list.
Adjusting the audio volume and muting the sound.
Displaying information about current and upcoming programs.
Accessing detailed program descriptions and schedules.
Choosing preferred audio tracks and languages for programs.
Selecting preferred subtitle languages for programs.
Accessing and navigating teletext information.
Using the EPG to view schedules and set program timers.
How to book a program using the EPG for automatic tuning or standby.
Creating and managing favorite channel lists for quick access.
Accessing satellite parameters, channel search, and program lists.
Performing an automatic search for all available channels.
Step-by-step guide for manually searching for channels.
Managing channels, including locking, skipping, and reordering.
Locking, skipping, or reordering individual channels.
Creating and managing custom favorite channel groups.
Viewing detailed information about selected channels.
Configuring automatic channel list updates.
Customizing language, audio, and display preferences.
Setting preferred languages for menus, audio, and subtitles.
Adjusting display settings like infobar duration and transparency.
Configuring video and audio output parameters (aspect ratio, TV type).
Setting the system time, timezone, and daylight saving.
Setting timers for channel changes, power on/off.
Managing parental controls and PIN settings.
Accessing system information, signal level, reset, and software upgrade.
Viewing smartcard and technical information for Tivùsat.
Playing back movie files (MKV, MP4, MPG) from USB.
Playing back music files (MP3, FLAC) from USB.
Viewing picture files (JPG, BMP) and managing slideshows.
Configuring network connection parameters (Auto/Manual).
To Next Page