info banner displayed. Press OK button to open the pop-up menu and use
pq to make your selection. Confirm with OK.
OSD Transparency: This setting allows you to set the transparency of the menu and the info
banner. The options range start from 20% (minimal transparency) up to 80%
(maximum transparency). The option Off disable the transparency. Press
OK button to open the pop-up menu and use pq to make your selection.
Confirm with OK.
Load Default: This setting returns the Display settings to the preset parameters. Press OK
button to open the pop-up menu and use pq to make your selection.
Confirm with OK.
7.3.3 A/V Output
This menu allows you to to modify the various parameters concerning audio and video.
The available settings are shown below:
Screen Mode: Options are: 16:9, 4:3. Press OK button to open the pop-up menu and use
pq to make your selection. Confirm with OK.
TV Aspect Ratio: Options are: Letter Box to fit 16:9 video content to 4:3 TV screen, in this case
the screen will display black bars above and below the image. Pan-Scan to fit
16:9 video content to 4:3 TV screen, but the content will have the extreme left
and right portions of the image cuted off and presented in full screen, other
options are Combined and Ignore. Press OK button to open the pop-up menu
and use pq to make your selection. Confirm with OK.
TV Type: Options are: PAL-G and NTSC. Press OK button to open the pop-up menu and
use pq to make your selection. Confirm with OK.
Audio Mode: This setting allows you to manage the S/PDIF output signal if you use an
external audio amplifier. Options are: PCM and By Pass. Press OK button to
open the pop-up menu and use pq to make your selection. Confirm with
OK.
Sync Mode: This setting allows you to synchronize the audio with the video in case of
offset. Options are: PTS Sync, Audio Sync and Video Sync. Press OK button to
open the pop-up menu and use pq to make your selection. Confirm with
OK.
7.3.4 Time
Set up your time zone for clock/time in your menu and system.
GMT Usage: Set to Auto for broadcaster defined time depending of country selection
you've made in the first Installation. Normally, the clock/time will be correct
and also follow up the summer time changes automatically. In this case select
the option Local System to set up time manually in the next step below. Press
OK button to open the pop-up menu and use pq to make your selection.
Confirm with OK.
Time: In the case you have selected Local System in the previous option, here you
can manually enter the date and time. Press OK button to open the pop-up
menu and use 0~9 buttons to set the date and time. Confirm with OK.
Summer Time: Daylight Saving Time. Select Off or On to add one hour extra for summer
time. Press OK button to open the pop-up menu and use pq to make your
selection. Confirm with OK.
15
To Next Page
Loading...
Need help?
Demodulator
Video
Audio