FTA Only: Use the t u button to change the parameter. Select Yes to enable the search
of unencrypted channels only, select No to store all channels available on the
TP.
Once all options have been set correctly, press the BLUE button to start scanning for channels.
7.2 Channel Manager
This menu allows you to create favourite lists, lock channels with PIN protection, skip channels, change
the order of the channel in the list or check the information regarding the displayed channel.
7.2.1 Edit Channel
In this menu it is possible to lock or skip a channel. It also allows you to change the order of the channels
on the list.
First select the desired channel using the pq buttons. To lock the channel press RED button, in
this case the channel will be protected with the PIN code. To enable viewing of the channel it will be
necessary to enter the code. To skip the channel press GREEN button, in this case the channel will be
skipped and it will no longer be selectable.
The YELLOW button also allows you to change the order of the channels contained in the channel list.
Select one of the 4 modes and confirm with OK.
To enable the changes made in the menu it is necessary to confirm them when exiting the menu by
selecting Ok. By selecting Cancel the changes will not be saved.
7.2.2 Edit Favorite
Channels from the TV list can be added to up to 8 different favourite groups which are: HD, Bambini,
Sport, Serie, Lista 1, Lista 2, Lista 3 and Lista 4.
To create or edit the favorite list, press MENU and select Channel Manager > Edit Favorite. Press FAV to
display the list where to add the channels and use OK to make your select. Now use pq to select the
channels to be add and confirm with OK. In the case you want to delete one channel just press OK on
the channel to remove.
It is also possible to rename the list name. Press u button to move the cursor to the right of the menu
and press YELLOW button to enable editing. Use pq and t u to compose the new name, RED to
delete and GREEN to confirm.
To use the newly created Favourite list, press FAV in normal viewing mode and select with pq the
preferred list.
NOTE: The channel list will display only the channels contained in the favourite list
selected. To back to the complete list select All
7.2.3 Channel Information
In this menu you will find all the information regarding the selected channel. Information regarding
frequency, polarity, symbol rate and much more. It can also be used to view the signal strength.
7.2.4 Channel Update Setting
The menu allows you to set up the channel list update. By setting Automatic search for new channels to
On and adjusting time and frequency, the channel list will be constantly updated. Select Off to disable
the update.
The following settings are available:
13
To Next Page
Loading...
Need help?
Demodulator
Video
Audio