24
PREVENTIVE MAINTENANCE (TO BE PERFORMED BY TRAINED SERVICE PROVIDERS), CONT’D
Condensate
Package
Support Pan
Sight Glass
Receiver
Condenser
Coils (Typ.)
Filter Dryer
Condenser Fan Motor,
Fan Blades, Guard
Compressor and
Electrical
Components
Shipment
Damage Screw
Valve-Reversing
4-Way
Accumulator
Shipment
Damage Screw
TXV
Note: Model G12F.5150 Is Shown.
Your Model May Slightly Differ
PREVENTIVE
MAINTENANCE
FREQ. INSTRUCTIONS
Condensate
Package
Quarterly Condensate Package Disconnect power from case before cleaning.
Remove rear panel (screw removal is required).
Slide condenser package out from under case rear.
Use moist cloth to wipe off dust & debris that collects on various parts (fans,
sight glass, TXV, etc.).
Illustration below shows various components that should be wiped down.
Slide condenser package back under case.
Replace rear panel.
To Next Page
Loading...
