Structural Concepts ENCORE Series - Troubleshooting (to be Performed by Trained Service Providers Only)

25
TROUBLESHOOTING (TO BE PERFORMED BY TRAINED SERVICE PROVIDERS)
Doors/Glass Won’t Shut Properly
Check that there is no residue or obstruction in door track.
System Is Not Operating
If power cord is used, check that it is properly plugged in.
Check the MAIN power switch is on.
Confirm that the utility power is on.
Check the circuit breaker box for tripped circuits. See GFCI
Breaker Use Requirement specifics in Overview and Warnings
section of manual.
Case Lights Are Not Working
Be sure ALL light bulb pins are properly aligned with slots and
rotated properly.
Check for burned out bulbs.
Clean dirt and dust from the bulbs to prevent flickering.
After performing above checkpoints, if lights are still not working,
contact your service provider or certified electrician to check for
faulty ballast.
Check that the case is aligned, level and plumb.