Struers LaboDoser-10 - Installation

3 Installation
Hint
If lubricant or suspension is not to be used for a prolonged period of
time, remove the bottle from the bottle holder and store it upright.
LaboDoser-10 can be mounted on the column of the following units:
• LaboUI
• LaboForce-50
• LaboForce-Mi
Procedure
A Suspension/lubricant
bottle
B Doser arm
C Adjustable valve
D Dosing nozzle
1. Use the bracket and the two screws to mount the dosing arm on the column of
the machine.
2. Attach the bottle cap with adjustable valve onto a Struers
suspension/lubricant bottle.
3. Insert the bottle into the doser arm.
6 LaboDoser-10
3 Installation