10
Minitom
Instruction Manual
1. Getting Started
Minitom is an automatic cut-off machine, with integrated cooling
tank, for cutting the majority of solid and stable (non-explosive)
materials, primary non-metals. The cut-off wheel speed and cutting
pressure can be adjusted during the cutting process.
The cutting process starts by the operator selecting and mounting
the cut-off wheel to be used and cut-off wheel rotation speed. The
specimen is secured by using the clamping tool mounted on the
specimen holder arm. Stop position is adjusted by moving the stop
plate.
A micrometre screw is used to move the specimen horizontally in
relation to the cut-off wheel.
The operator starts the machine manually.
Hereafter, the specimen mover arm is moved slowly down towards
the cut-off wheel and the cutting pressure is adjusted using the
weight on the specimen holder arm.
The machine stops automatically, and the operator can remove the
cut-off specimen.
The machine must always be used with the splash guard in place.
Ca
refully, cut the packing tape on top of the box.
Remove the loose parts.
Carefully lift Minitom from the box, supporting from underneath
the machine.
To Next Page
Loading...
