What to do if the emergency stop is active on my Struers AbraPol-10 Cutter?
If the emergency button on your Struers Cutter was pressed, it interrupts the preparation. To resolve this, pull the button outwards to release it and follow the on-screen instructions.
What to do if the database is full on Struers Cutter?
This issue occurs when the database storing capacity has been reached. To fix this, delete one or more methods to free up space for storing new ones.
Why is water not draining away from my Struers AbraPol-10?
The issue is likely due to a squeezed or clogged drain hose, or the hose not sloping downwards. First, straighten the hose if it's squeezed. If that doesn't work, clean the hose to remove any clogs. Finally, ensure the drain hose has an even downward slope.
Why is the disc rotating in the wrong direction on my Struers AbraPol-10?
The disc is rotating in the wrong direction because of a wrong connection to the power supply. To correct this, switch two of the phases.
What to do if 2-hand-start released too early on Struers Cutter?
This happens because the two start buttons haven't been pressed long enough to start the process. Make sure to keep the start buttons pressed until the sample motor starts.
What to do if '10 steps is maximum' on Struers AbraPol-10 Cutter?
The maximum of 10 steps has been reached. Two or more methods can be used alternately.
What to do if the water level in the tank is too low in Struers Cutter?
The water level in the recirculation tank is too low. Refill the circulation water as needed.
How to fix a blank display on my Struers AbraPol-10 Cutter?
If the AbraPol-10 display is blank when switched on, it might be in Sleep Mode or the backlight is off. Press any key to re-activate the backlight.
How to fix unclear display text on my Struers Cutter?
The display is sensitive to temperature changes. Adjust the display contrast in the CONFIGURATION Menu.
Key safety guidelines for operating the AbraPol-10 machine.
Initial setup and familiarization with the AbraPol-10 machine.
Instructions for operating the AbraPol-10 machine and its functions.
Tasks for weekly service, general cleaning, and cooling tank care.
Detailed guide to advanced features, methods, and parameter settings.
Classification of messages into informative, error, and fatal error types.
Troubleshooting common operational issues like display, rotation, and drainage problems.
Details on disc, specimens, dosing unit, cooling, software, environment, and power.
Specifications for supply voltage, water, air, fittings, dimensions, and weight.
List of available accessories, consumables, and their codes.
Summary of main controls, function keys, knob, and basic operation.
Quick steps for running, copying, editing, and modifying preparation methods.
To Next Page
General
