AbraPol-10
Instruction Manual
55
4. Trouble shooting
Error Explanation Action
Machine Problems
AbraPol-10 is switched on but the
display is blank
The backlight of the display has
been switched off. AbraPol-10 is in
Sleep Mode.
Press any key to re-activate the
backlight.
Display text not clear The display is sensitive to
temperature changes.
Change the display contrast in the
CONFIGURATION Menu.
Display defective Defect in the circuit of the display or
defect in the CPU circuit.
Call a technician.
Disc rotates in the wrong direction. Wrong connection to the power
supply.
Switch two of the phases.
Drain hose squeezed. Straighten the hose.
Drain hose clogged. Clean the hose.
Water not draining away.
Drain hose does not slope
downward.
Adjust the hose to an even slope.
To Next Page
